AMX MVP-5100 - Manual (Page 43)

Configuring Communication
35 MVP-5100/5150 Modero Viewpoint Touch Panels
6. In the new window:
- Select Use the following IP Address.
Under IP address, provide an IP address. Ensure that it is in the same subnet as the IP address
given to the usb0 interface on the MVP-5100, but make sure that it has a different node
number. The IP address cannot be the same as the panel`s USB IP address.
Under Subnet mask, set the suitable subnet mask.
Click OK.
7. In the next box (FIG. 28), make sure to:
Select Search for the best driver in these locations.
Select Include this location in the search.
Click on Browse.
Select the folder that contains the 'linux.inf' file.
8. Click on Next.
FIG. 28 Found New Hardware Wizard Installation Options dialogue box