AMX MVP-5100 - Manual (Page 36)

Configuring Communication
28 MVP-5100/5150 Modero Viewpoint Touch Panels
5. In this keyboard, enter the SSID name used on the target Wireless Access Point (case sensitive).
The card should be given the SSID used by the target WAP. If this field is left blank, the unit
will attempt to connect to the first available WAP. By default, all WAP250Gs use AMX as
their assigned SSID value.
One of the most common problems associated with connection to a WAP involves an incorrect
SSID. Make sure to maintain the same case when entering the SSID information. ABC is not
the same as Abc.
FIG. 17 Wireless Settings page (showing a sample unsecured configuration)
FIG. 18 Site Survey of available WAPS (Unsecured WAP shown selected)
FIG. 19 Wireless Settings page - Open (Clear Text) security method
MVP connection
IP info
Wireless card
security settings
Select an OPEN
(unsecured) WAP
Connecting to the
WAP begins the
communication.
Required information:
- SSID (Network Name used by the Target WAP)
By default, this field displays the
SSID - AMX