Apex Digital 5708009-C - Manual (Page 139)

5708009-C 5-11
Apex 1 to 5.5 kW Generator
Note: Either cable connectors or interlock covers must be installed to allow the
generator to operate.
TO CONTROL THE GENERATOR THROUGH A USER PORT
Apex User port options are identified by PIN position 8, and they are discussed
individually in “Apex User Port Options” on page 4-2. Use the generator’s PIN and
Table 1-1. on page 1-4 to identify the appropriate User port section of the manual for
your unit.
To connect to the User port, install the appropriate I/O cable (cable requirements are
identified in the individual User port sections).
TO CONTROL THE GENERATOR THROUGH A HOST PORT
Apex Host port options are identified by PIN position 6, and they are discussed
individually in “Apex Host Port Options” on page 4-37. Use the generator’s PIN and
Table 1-1. on page 1-4 to identify the appropriate Host port section of the manual for
your unit.
To Connect to an Apex Host Port:
1. Ensure that the required User port inputs are satisfied. The required User port
inputs are identified under the Satisfying Minimal Requirements section for your
User port. To determine which User port you have, see the information for PIN
position 8 in Table 1-1. on page 1-4.
2. Connect and secure the appropriate serial cable to the Apex unit and the host
(cable requirements are identified in the individual Host port sections).
RISK OF DEATH OR BODILY INJURY
Disconnect all sources of input power before working on this unit or
anything connected to it.
Do not connect any power to this unit without first connecting cooling
water and ensuring there are no leaks.