Apex Digital 5708009-C - Manual (Page 134)

5-6 5708009-C
Advanced Energy
®
Apex output connectors vary depending on the option installed on the generator. The
output connector option is identified by the option in PIN position 11 (for information
about using the PIN to identify and find information about your generator, see “Using
this Manual to Find Information for Your Generator” on page 1-1). The following
section provides signal pin locations and descriptions to aid in properly connecting
output power.
There are five output connector options:
• 7/16 connector (PIN option 1)
• SQS ™ connector (PIN option 2)
• LC connector (PIN option 3)
• HN connector (PIN option 4)
• N connector (PIN option 5)
Figure 5-4 provides a basic drawing of the output connectors.
Figure 5-4. Output connector
For all the output connectors, the center pin provides the RF output connection, while
the outer cable provides a ground connection.
Connecting Input Power
Apex input power connectors vary depending on the option installed on the generator.
The output connector option is identified by the option in PIN position 13 (for
information about using the PIN to identify and find information about your generator,
see “Using this Manual to Find Information for Your Generator” on page 1-1). The
following sections provide signal pin locations and connector illustrations to aid in
properly connecting input.