Allied Telesis FastPrint Server - Manual (Page 98)

Appendix DSNMP MIB
FastPrint Server User’s Guide 88
LP8PostString The string sent to logical printer 8 whenever the job ends.
LP8LFChange Convert LF to LF+CR status.
D.3. PSNetwareConfig group
Object Object Description Description
FrameethernetIIEnable EthernetII frame type status
Frame802-2Enable Ethernet 802.2 frame type status
Frame802-3Enable Ethernet 802.3 frame type status
FrameSnapEnable Ethernet 802.2 SNAP frame type status
OperationMode The current Netware operation mode. PS: Print Server
mode, RP: Remote Printer mode.
MasterFileSrvrName The name of the file server that the FastPrint will connect
to first. The master file server contains all the information
that the FastPrint needs, including a list of all other file
servers to be serviced. (Netware 2.x, 3.x)
NDSTreeName The NDS tree name for Netware Print Server to login into.
(Netware 4.x)
NDSContext The NDS context where the Print Server's object belongs.
NetwareQPollingInterval The Netware Print Server polling interval. The range is 1-
255 minutes.
JobNotifyByConnID When the job ends, Print will notify the user by the
connection ID.
NetwarePrintServerP1 The Netware Print Server to connect to for parallel port 1,
when the FastPrint is operating as a remote printer.
NetwarePrintServerP2 The Netware Print Server to connect to for parallel port 2,
when the FastPrint is operating as a remote printer.
NetwarePrintServerP3 The Netware Print Server to connect to for parallel port 3,
when the FastPrint is operating as a remote printer.
D.4. PSTcpipConfig group
Object Object Description Description
IPAddr The FastPrint Server’s IP address.
GatewayAddr The default gateway IP address.
SubnetMask The subnet network mask.
D.5. PSAppleTalkConfig group
Object Object Description Description
AppleTalkZone The zone name where the FastPrint Server is located.
PrinterTypeP1 The printer driver type for parallel port 1.
PrinterTypeP2 The printer driver type for parallel port 2.
PrinterTypeP3 The printer driver type for parallel port 3.
BinaryCommEnableP1 Binary communication protocol status. When disabled, the
data is transparently sent to the printer.
BinaryCommEnableP2 Binary communication protocol status. When disabled, the
data is transparently sent to the printer.