Allied Telesis FastPrint Server - Manual (Page 71)

Chapter 8. Management Tools
FPSAdmin
FastPrint Server User’s Guide
61
Refresh Refresh
Menu Equivalent: None
Select this icon to update the FastPrint listing after changing the name or IP
address, or after powering up additional FastPrints.
Exit Exit
Menu Equivalent: Help - Exit
Exit FPSAdmin.
Note: Remember to save any changes to the FastPrint before you exit.
Set to Default Set to Default
This button appears on many screens. Clicking it replaces the on-screen values
with the default settings. They are not saved until you click Save to Device.
To set all FastPrint Server values to the default, use the menu option InitDevice -
Restore Factory Default.
Save to Device Save to Device
Clicking this will write any changed configuration information to the FastPrint,
updating the FastPrint’s NVRAM configuration file.
You must then reset the FastPrint Server. You may either use the InitDevice menu
option to do this, or reboot the FastPrint.
8.1.3.2. Printer configuration
Clicking the Configuration button in the Printer Status window will reveal a window
like the following example. This button will be grayed out if the printer does not support
this option, or if the printer is busy printing.
Figure 30 Printer Configuration
Environment variable Environment variable
This list of printer configuration variables will vary from printer to printer.