Allied Telesis FastPrint Server User Manual

Page 21

Chapter 4. Novell NetWare

Configuration using Quickset

FastPrint Server User’s Guide

NDS tree name

Set this to the current NDS tree name
(in NDS environment)

NetWare operation mode:

Print Server mode

Device name

Set this as specified in the parameter list

Device password

NULL

4.3.1.1. Syntax

Bindery-based file server

Quickset Name (/UN=P) (/Q1=W) (/Q2=X) (/Q3=Y) (/FS=F)

NDS Network

Quickset Name (/UN=P) (/Q1=W) (/Q2=X) (/Q3=Y)

Parameter

Meaning

Name

The default name as displayed on the bar code label on the
bottom of the FastPrint Server.

New name of the FastPrint.

W, X, Y

W, X and Y are the names of the queues to be serviced by
parallel ports 1 to 3. P1, P2 and P3 are the default queue names.

F is the name of the master file server of the FastPrint. When
multiple file servers are serviced, this information is stored in
the master file server.

QUICKSET will create a print server object, printer objects and queue objects with the
current context and current tree that the user logs on to. The printer names will be set to
dv_P1, dv_P2 and dv_P3, where dv is the FastPrint Server default name, and P1, P2 and
P3 indicate the port.

Example: Bindery environment

Quickset SC123456 /UN=Marketing /FS=Net311
In this example, FastPrint SC123456 has been set up as a Novell Print Server. Its new
name is Marketing and its Master File Server is Net311.

Example: NDS environment

Quickset SC123456 /UN=Marketing
In this example, SC123456 has been renamed Marketing and set up as a Novell Print
Server in the current NDS network.

4.3.2. Novell Remote Printer Mode

In NetWare Remote Printer mode, Quickset uses the following settings:

Parameter

Setting

Ethernet 802.2 frame type

Enable

Ethernet 802.3 frame type

Enable

Ethernet SNAP frame type

Enable

Ethernet II frame type

Enable

NetWare Print Server

Set the attached NetWare Print Server
as the specified server

NetWare Operation Mode

Remote Printer Mode