Printing – Allied Telesis FastPrint Server User Manual

Page 28

Chapter 4. Novell NetWare

Printing

FastPrint Server User’s Guide

If the NetWare Pserver has not been loaded, you must load it. In this case, go directly
to step (d).

(a) Go to the file server console where the NLM is running

(b) Press Alt-E

until you get to the Print Server NLM screen.

to halt the Print Server NLM. Answer Yes.

(d) After the NetWare NLM has been unloaded, enter the following command:

load pserver XXXX

XXXX is the NetWare Print Server selected in step 2 (b).

(a) When the Enter Print Server Name menu appears, press I

NSERT

until you get to

Contents of Current Context. Select the context that holds the FastPrint Server.
Select the FastPrint from the list and press E

NTER

4.5. Printing

You can use NetWare’s standard utilities, CAPTURE, NPRINT, or PCONSOLE, to
print a job to the FastPrint SCxxxxxx.

Note: The default name begins with the letters “SC”, followed by 6 hexadecimal

characters. These characters may include the numbers “0” through “9”
and the letters “A” through “F”.

Note: If you are not familiar with the CAPTURE or NPRINT utilities, the on-line

help is available by typing /? after the command.

CAPTURE /? [E

NTER

]

In the following examples, print queue P1 is serviced by FastPrint SCxxxxxx. To print,
the file is sent to print queue P1.

Example 1

If you want to use NPRINT to print the file c:\config.sys to SCxxxxxx, use the
command:

NPRINT c:\config.sys /Q=P1 /NOTI /T=4 /NFF /NB

Note: For NPRINT usage and options, see your NetWare documentation.

Example 2:

To use CAPTURE to print the file c:\config.sys to the FastPrint, use the commands:

CAPTURE /L=1 /Q=P1 /NOTI /NT /FF /NB

COPY c:\config.sys LPT1

In this example, output destined for LPT1 is redirected to print queue P1.

Note: For CAPTURE usage and options, see your NetWare documentation.