Allied Telesis FastPrint Server - Manual (Page 69)

Chapter 8. Management Tools
FPSAdmin
FastPrint Server User’s Guide
59
NetBEUI Configuration NetBEUI Configuration
Menu equivalent: Configuration - NetBEUI
Selecting this icon leads to the following screen.
Figure 26 NetBEUI Configuration
8.1.3.1. NetBEUI Settings
♦ Domain name
Enter the designated work group to be serviced by the FastPrint.
♦ Response Time
Sets how fast jobs are sent to the printer. By default, this is set to no delay
(zero). This value should only be increased if your printer cannot cope with
no delay.
♦ Abort Job As Paper Out
YES will terminate the current print job when a printing error is
encountered. NO (default) will try to continue but may cause print errors. If
errors occur, try setting this value to YES.
Note: Normally, there should be no need to adjust these settings.