Allied Telesis FastPrint Server User Manual

Page 24

Chapter 4. Novell NetWare

Using PCONSOLE / PSCONFIG

FastPrint Server User’s Guide

(g) Repeat steps (d), (e) and (f) for each printer port.

4. Associate printers with print queues

Associate printers with print queues

Follow the steps below to associate print queues with the printer(s) attached to the
FastPrint Server.

(a) Select Queues Serviced by Printer from the Print Server Configuration Menu.

(b) Select a printer to which you want to assign a print queue.

(d) Select the queue that you want the printer to service.

(e) Press [Enter] twice.

(f) Repeat steps (a) to (e) until all printer and queue associations are configured

completely.

(g) Exit PCONSOLE.

5. Configure the FastPrint Server

Configure the FastPrint Server

(a) Run the PSCONFIG program.

(b) Select your FastPrint Server.

(d) Enter the file server you are logged on to. This will be the master file server to the

FastPrint.

(e) Replace Print Server name with the name used in step 2(c).

(f) Select Execute Setup.

4.4.1.2. Print server mode in NetWare 4.x (bindery emulation)

This procedure configures the FastPrint Server as a NetWare Print Server under
NetWare 4.x Bindery Emulation Mode.

1. Quick Setup on a File Server

Quick Setup on a File Server
(a) Login as ADMIN or a user with Admin rights.

(b) Run PCONSOLE and press [F4] to switch to bindery mode.

(d) Enter the desired names in the following fields:

Print server
New printer
New print queue

(e) Press [F10] to save.

(f) Repeat steps (b) to (e) for parallel ports 2 and 3.

Note: If the desired Print Server name already exists, you must delete that object

first.

2. Configure the FastPrint Server

Configure the FastPrint Server

(a) Run the PSCONFIG program.

(b) Select your FastPrint.

(d) Select the file server you logged on in step 1(a) to be the master file server.