Allied Telesis FastPrint Server - Manual (Page 25)

Chapter 4. Novell NetWare
Using PCONSOLE / PSCONFIG
FastPrint Server User’s Guide
15
(e) Replace the FastPrint name with the name set in step 1(d).
(f) Select Execute Setup.
4.4.1.3. Printer server mode in NetWare 4.X (NDS mode)
Follow the steps below to configure the FastPrint Server in NDS Print Server mode:
1. 1. Quick Setup on a NDS network Quick Setup on a NDS network
(a) Login as ADMIN or a user with Admin rights.
(b) Run PCONSOLE.
(c) Select Quick Setup.
(d) Enter your desired FastPrint name in the Print Server field. Record the context.
(e) Enter the desired names in the following fields:
New printer
New print queue
Print Queue Volume
(f) Press [F10] to save.
(g) Repeat steps (b) to (f) for parallel ports 2 and 3.
(h) Exit PCONSOLE.
(i) Enter the command whoami and record the Tree name.
2. 2. Configure the FastPrint Server Configure the FastPrint Server
(a) Run PSCONFIG.
(b) Select your FastPrint Server. Replace the FastPrint name with the name used in
step 1(d).
(c) Select Set to NetWare Print Server Mode.
(d) Enter data as follows:
NDS Tree name: Tree name recorded in step 1(i).
Print Server NDS Context: As recorded in step 1(d).
(e) Select Execute Setup.
4.4.2. Novell remote printer mode
4.4.2.1. Remote printer assignments
The following assignments should be used in remote printer mode, where SCxxxxxx is
the FastPrint Server name.
Note: The default FastPrint name begins with the letters “SC”, followed by 6
hexadecimal characters. These characters may include the numbers “0”
through “9” and the letters “A” through “F”.
FastPrint Server FastPrint Server NetWare NetWare
Port Printer Type Printer Name
Parallel 1 Remote Parallel, LPT1 SCxxxxxx
Parallel 2 Remote Parallel, LPT2 SCxxxxxx_P2
Parallel 3 Remote Parallel, LPT3 SCxxxxxx_P3