Allied Telesis FastPrint Server - Manual (Page 26)

Chapter 4. Novell NetWare
Using PCONSOLE / PSCONFIG
FastPrint Server User’s Guide 16
4.4.2.2. Remote printer mode in NetWare 2.x, 3.x
Follow the steps listed below to configure the FastPrint to Novell Remote Printer mode.
1. 1. Create queues Create queues
Follow the steps below to create queues for the FastPrint.
Note: If you are using existing queues, go to step 2.
(a) Run PCONSOLE.
(b) Select Print Queue Information.
(c) Press the [I NS ] key to add a new queue.
(d) Type a queue name, and press [E NTER ].
(e) Repeat steps (c) and (d) until you have the desired number of queues.
2. 2. Assign printers Assign printers
(a) Run PCONSOLE and select Print Server Information.
(b) Select a NetWare Print Server.
(c) Select Print Server Configuration.
(d) Select Printer Configuration.
(e) Select printers that show Not Installed.
(f) Enter the correct data in the Name and Type Fields. (See Remote printer
assignments on page 15 for more information about these fields).
(g) Press [E SC ], then select Yes.
(h) Repeat steps (b) to (g) until all printers are assigned.
(i) Press [E SC ].
3. 3. Associate printers with print queues Associate printers with print queues
(a) Select Queues Serviced by Printer.
(b) Select a printer to which you want to assign a print queue.
(c) Press [I NS ].
(d) Select the queue that you want the printer to service, and press [E NTER ].
(e) Repeat steps (a) to (d) until all printer and queue associations are configured.
(f) Exit PCONSOLE.
4. 4. Configure the FastPrint Server Configure the FastPrint Server
(a) Run PSCONFIG.
(b) Select your FastPrint Server.
(c) Select Set to NetWare Remote Printer Mode.
(d) For all print ports, enter the NetWare Print Server Name you selected in step 2(b).
(e) Select Execute Setup.
4.4.2.3. Remote printer mode in NetWare 4.X (NDS mode)
If you are in NDS mode, you can follow the steps listed below to configure the FastPrint
as a Novell Remote Printer. These steps will help you to install a new FastPrint as a
remote printer or to connect a new printer to the FastPrint.