Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 96)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - The Virtual Channel (VC) Cross Connect sub-menu option does not display the
correct parameters. Instead, it displays the sub-menu option name as a parameter with a value
of 'noSuchName'.
AAL5 Performance Statistics
Displays performance statistics information associated with an AAL5 virtual channel
connection.
Note - The AAL5 Performance Statistics sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
PPP Menu
From the PPP menu, you can view and edit Point-to-Point Protocol information such as Link Control
Protocol information, Link Quality Report information, PPP tests, MAC Bridging over PPP, IP over
PPP, and security protocol.
PPP Link Group
PPP Link Status
Displays management information about a particular PPP Link.
PPP Link Configuration
Displays configuration information about a particular PPP Link.
Note - The current firmware version does not allow the Initial MRU parameter to be
configured. Attempting to configure this parameter will not result in an error but the new
value will not be applied.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Receive ACC Map
o Transmit ACC Map
o
Magic Number
o FCS Size
Attempting to configure these parameters will result in the error message: "The error
occurred with 'Set' operation. Error: bad value."
PPP Link Quality Report
LQR Info
Displays Link Quality Report information for a particular PPP link.
PN 613-50507-00 Rev D Page 96 of 253