Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 44)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Supports up to 8 stacked AT-8324 switches.
Device Manager LEDs for AT-8324
LED State Description
PWR Green The switch is receiving power.
DUPLEX Green
Orange
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
Note - The current firmware version does not allow AT-View Plus Device Manager to support the
RPS and the Master LEDs.
Note - A GBIC image is always visible on the GBIC slot of the AT-A15 expansion module even if
there is no GBIC physically inserted.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log into the
CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and description.
Note - Attempting to enter more than 39 characters for the System Contact, System Name,
and System Location parameters will result in the error message: "The error occurred with
'Set' operation. Error: gen Error".
Firmware Info
Displays firmware version.
Network Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Manager Address Info
Displays the IP address of the management station.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
PN 613-50507-00 Rev D Page 44 of 253