Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 232)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
AT-PB1000 Series Media Converter Modules
PB1001/1 PB1001/3 PB1005G
LED State Description
LT Green Link Test is enabled
SML Green Smart Missing Link is enabled
ML Green Missing Link is enabled
Note - Smart Missing Link is only supported on the AT-PB1005G module. However, the current
firmware version allows the Link Test parameter of the AT-PB1001/1 and AT-PB1001/3 modules to
be set to 'smart-missing-link'.
Note - The Port A Mode and the Port B Mode parameters return 'not supported' for these modules.
Note - A GBIC image is always visible on the GBIC slot of the PB1005G module image even if
there is no GBIC physically present in the slot.
PowerBlade Modules
PN 613-50507-00 Rev D Page 232 of 253