Agent menu – Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT User Manual
Page 65
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
Device Manager LEDs for AT-8401 Management Module
LED
State
Description
FAN A
Green
Gray
FAN TRAY A is installed and is operating correctly.
FAN TRAY A is not installed.
FAN B
Green
Gray
FAN TRAY B is installed and is operating correctly.
FAN TRAY B is not installed.
MASTER Green
Gray
The switch is the master of an enhanced stack.
The switch is either a slave switch of an enhanced stack or the switch
is not a member of an enhanced stack.
RPS
Green
Gray
The switch is receiving power from the redundant power supply
(PWR B).
The switch is receiving power from the main power supply (PWR A).
PWR
Green
Gray (Only if
RPS is installed)
The switch is receiving power from the main power supply (PWR A).
The main power supply is not functioning.
Note
- Please refer to
for the operations and behavior of the line cards installed
on the chassis.
Note
- The FAN A and FAN B LEDs are always green regardless of whether or not fan trays are
actually
installed.
Note
- The PWR LED is always green and the RPS LED is always gray regardless of whether the
switch is receiving power from the main power supply or the redundant power supply.
Note
- Some parameters, when configured, may at times cause a temporary loss of connection. When
this happens, the following error message appears: "The error occurred with 'Set' operation. Error:
time out occurred.". This will not affect the application in any way.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log into the
CLI using Telnet.
PN 613-50507-00 Rev D
Page 65 of 253