Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 210)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Device Manager LEDs for AT-MCF12 Family
LED State Description
PWR Green
Gray
The main power supply is installed and power is on.
The main power supply is not installed or it is installed but not powered
on.
RPS Green
Gray
The backup power supply is installed and power is on.
The backup power supply is not installed or it is installed but not
powered on.
NORM Green
Gray
The unit is not performing a link test.
The unit is performing a link test.
TEST Green
Gray
The unit is performing a link test.
The unit is not performing a link test.
Note - The current firmware version does not allow AT-View Plus Device Manager to support the
Reset button.
Agent Menu
From the Agent Menu, you can view and edit the system information for the device, or log into the
CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and description.
Note - AT-View Plus Device Manager allows the user to enter more than the 50-character
limit for the System Contact, System Name, and System Location parameters. However,
doing so may result in any of the following :
• Anywhere from 1 to 12 characters may be truncated from the entered value.
• The firmware password may be overwritten if 255 characters are entered for the
System Location parameter. Once this happens, a firmware reload will be required.
• The last 50 characters of the entered value may go into the System Contact parameter
if 255 characters are entered for the System Name parameter.
.
Note - AT-View Plus Device Manager allows the user to enter multiple-word values for the
System Contact, System Name, and System Location parameters. NULL values are not
allowed.
PN 613-50507-00 Rev D Page 210 of 253