Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 235)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Port Menu
From the Port menu, you can view MIB information about the ethernet and voice ports.
Interface Info
Ethernet
Displays information for each ethernet port.
Note - The current firmware version returns 'not available' for the following parameters:
o
Port Link State
o Port Type
o
Port Speed
o Port Duplex Mode
o
Port Autonegotiation State
Voice
Displays information for each voice port. Information displayed will vary depending on the
protocol used : H.323, Media Gateway Control (MGCP), or Session Initiation (SIP).
Note - H.323 : The Port Capability parameter does not display all capabilities used during
call setup.
Note - MGCP : The current firmware version returns 'deleted' for the Port State parameter
even if an MGCP port has already been created.
Note - MGCP : The current firmware version returns 'data -> ' instead
of actual values, for the following parameters:
o
Port Operational State
o Port Type
o
Port Profile
o Port Domain
o
Port End Point Identifier
o Port Package
o
Port Call Agent
o Port Notified Entity
o
Port Digit Map
o
Port Network Loss Rate
Note - MGCP : The current firmware version returns '0', instead of actual values, for the
following parameters:
o
Port Suspicion Threshold
o
Port Disconnection Threshold
PN 613-50507-00 Rev D Page 235 of 253