Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 204)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
WEB browser
Displays the mapping of IP addresses to MAC addresses (the ARP cache), on the switch.
Telnet
Starts a Telnet connection to the switch.
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the device if the device has a valid resource file
loaded and set, and the HTTP server and GUI on the device are enabled.
Reset Cold
Resets the hardware and executes the default configuration file.
Reset Warm
Performs a warm start of the software modules and executes the default configuration file.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing functions.
ARP Table
Address Table
Displays the list of IP interfaces and their IP addresses on the switch.
Route Table
Displays the IP routing table on the switch.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
ICMP Statistics
Displays statistics about ICMP, including the number of ICMP datagrams received.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding database
and the spanning tree status.
Forwarding Database
Displays the Forwarding Database table.
PN 613-50507-00 Rev D Page 204 of 253