Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 193)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Config File Name
Displays the file name of the start-up configuration file.
Starts a Telnet connection to the switch.
ce if the device has a valid resource file
loaded and set, and the HTTP server and GUI on the device are enabled.
Boards Info
Displays information about the chassis board, and switch controller and line card boards
installed in the device.
Telnet
WEB browser
Opens your web browser and connects to the switch's HTTP server.
Note - The web browser can only contact the devi
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing functions.
ARP Table
Displays the mapping of IP addresses to MAC addresses (the ARP cache), on the switch.
Address Table
Displays the list of IP interfaces and their IP addresses on the switch.
Route Table
Displays the IP routing table on the switch.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
ICMP Statistics
Displays statistics about ICMP, including the number of ICMP datagrams received.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding database
and the spanning tree status.
Forwarding Database
Displays the Forwarding Database table.
PN 613-50507-00 Rev D Page 193 of 253