Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 158)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Gray
Red
Either:
- there is no PSU or FOM in the PSU bay, or
- a PSU is installed but has a power supply or fan fault or its
temperature has exceeded its recommended threshhold (75
degrees C), or
- an FOM is installed and a fan has failed.
Duplex Green
Orange
Gray
The port is operating at full duplex.
The port is operating at half duplex.
There is no link over the port.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log into the
CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and description.
Power Supply Info
Displays information about the power supply.
Firmware Info
Displays a list of software releases installed on the switch.
File List
Displays a list of the files in the switch's file system.
Config File Name
Displays the file name of the start-up configuration file.
Chassis Temperature and Fan Info
Displays the actual temperature of the switch, the temperature status, and the fan status.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Opens your web browser and connects to the switch's HTTP server.
PN 613-50507-00 Rev D Page 158 of 253