Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT - Manual (Page 239)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - The current firmware version does not allow AT-View Plus Device Manager to determine the
negotiated mode for active LAN or WAN ports that are configured to auto-negotiate. As a result, the
Duplex LED will turn gray.
Note - AT-RG613xx : When link is established on a LAN or WAN port that is configured to auto-
negotiate, the current firmware version returns 'No such instance' for the Speed parameter under the
Standard sub-menu option. As a result, no speed is displayed on the RJ-45 LAN or WAN port
images.
Note - AT-RG656BD : The current firmware version does not allow AT-View Plus Device Manager
to support the RPS LED.
Note - AT-RG656BD: The current firmware version does not allow AT-View Plus Device Manager
to support the Reset button.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log into the
CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and description.
Note - The current firmware version does not allow the user to enter multiple-word values for
the System Name parameter. Attempting to do so will result in the error message: "The error
occurred with 'Set' operation. Error: commit Failed."
Note - AT-View Plus Device Manager allows the user to enter up to 188 characters for the
System Name parameter.
Device Info
Displays device information such as the application version, hardware version and vendor
information.
Telnet
Starts a Telnet connection to the residential gateway.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such asforwarding database, aging
time info and Quality of Service (QoS) info.
Forwarding Database
Displays the Forwarding Database table.
PN 613-50507-00 Rev D Page 239 of 253