Allied Telesis AT-S63 User Manual
Page 83
AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features
83
Speed
The operating speed of the port. The possible settings are:
0010 - 10 Mbps
0100 - 100 Mbps
1000 - 1000 Mbps
Duplex
The duplex mode of the port. The possible settings are half-
duplex and full-duplex.
PVID
The VLAN
identifier (VID) of the VLAN in which the port is an untagged
member. This column does not include the VIDs of the VLANs
where the port is a tagged member.
Flow Control
The port’s flow control setting. The possible settings are:
Enabled - Flow control is enabled on the port.
Disabled - Flow control is disabled on the port.
STP State
The operating status of the port. The possible settings are
Forwarding and Disabled.
Filtering
Enables or disables filtering which discards ingress packets of a
particular type. The possible settings are:
B-Bcast (Broadcast packet filtering) - The possible settings are
enabled or disabled.
UM-Unknown Multicast (Unknown multicast packet filtering) -
The possible settings are enabled or disabled.
UU-Unknown Unicast (Unknown unicast packet filtering) - The
possible settings are enabled or disabled.
HOL Blocking
HOL blocking state. The possible settings are:
Enabled or disabled
# of cells - Threshold number of cells.