Allied Telesis AT-S63 - Manual (Page 179)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 179
The Spanning Tree tab is displayed, as shown in Figure 54 on page
171.
This tab displays information on whether spanning tree is enable
or disabled and which protocol version, STP or RSTP, is active.
4. Click View.
The Monitor RSTP Parameters tab is shown in Figure 59.
Figure 59. Monitor RSTP Parameters Tab (Monitoring)
5. To view port settings, click a port in the switch and click Status or
Settings.
The RSTP Settings page is shown in Figure 60.
Figure 60. RSTP Settings Page