Allied Telesis AT-S63 - Manual (Page 132)

Chapter 11: Event Log
132 Section II: Advanced Features
Normal
Displays the time, module, severity, and description for each
event. This is the default. An example of Normal mode is shown in
Figure 38 on page 134.
Full
Displays the same information as Normal, plus the file name, line
number, and event ID. An example of Full mode is shown in Figure
39 on page 135.
7. To display events of a particular AT-S63 software module, from the
Module Selections list, select one or more of the modules listed in
Table 1. To select more than one module, use click.
Table 1. AT-S63 Software Modules
Name Description
ACL Access control lists
ALL All modules
CFG Configuration file
CLI Command line interface commands
DOS Denial of Service defense
ENCO Encryption keys
ESTACK Enhanced stacking
EVTLOG Event log
FILE File system
GARP GARP VLAN Registration Protocol
HTTP Web server
IGMPSNOOP IGMP snooping
IP IP configuration
MAC MAC address table
MGMTACL Management ACL
PACCESS 802.1X Port-based Access Control
PCFG Port configuration
PKI Public Key Infrastructure