Allied Telesis AT-S63 - Manual (Page 72)

Chapter 5: Enhanced Stacking
72 Section I: Basic Features
Displaying the Enhanced Stacking Status
To display the enhanced stacking status of the switch, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select Layer 2.
The Layer 2 page is displayed with the MAC Address tab selected
by default, as shown in Figure 25 on page 94.
3. From the Layer 2 page, select the Enhanced Stacking tab.
The Enhanced Stacking tab is shown Figure 17.
Figure 17. Enhanced Stacking Tab (Monitoring)
The information in the tab states the current enhanced stacking
status of the switch as master, slave, or unavailable.