Allied Telesis AT-S63 - Manual (Page 219)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 219
To restrict the user’s view to the third row (all columns) of the MIB
ifEntry.0.3, enter the following value for the Subtree Mask
parameter
ff:bf
6. In the View Type field, enter one of the following view types:
Included
Enter this value to permit the View Name to see the subtree
specified above.
Excluded
Enter this value to not permit the View Name to see the subtree
specified above.
7. In the Storage Type field, enter a storage type for this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Target Parameters Table. After making changes to an
Target Parameters Table entry with a Volatile storage type, Save
Changes does not appear on the General tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the View Table. After making changes to a View Table entry with a
NonVolatile storage type, Save Changes appears on the General
tab. Allied Telesyn recommends this storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the SNMPv3 View Table entry
takes effect immediately.
8. Click Apply.
9. To save your changes, return to the General tab and click Save
Changes.