Allied Telesis AT-S63 - Manual (Page 113)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 113
Modifying a Port Mirror
To modify a port mirror, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Layer 1 option.
The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 18 on page 74.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 31 on page 110.
4. Click Modify.
The Modify Mirror page is shown in Figure 32 on page 111.
5. Click the ports of the port mirror to change its type. Clicking a port
toggles it through the possible settings, which are as follows:
The destination (mirror) port. There can be only one
destination port.
A source port. The port’s ingress traffic is mirrored to the
destination port.
A source port. The port’s egress traffic is mirrored to the
destination port.
A source port. The port’s ingress and egress traffic is
mirrored to the destination port.
6. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.