Allied Telesis AT-S63 - Manual (Page 231)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 231
4. Click the button next to the SecurityToGroup Table entry that you
want to change, and then click Modify.
The Modify SNMPv3 SecurityToGroup page is shown in Figure 81.
Figure 81. Modify SNMPv3 SecurityToGroup Page
5. In the Group Name field, enter a Group Name that you configured in
the SNMPv3 Access Table.
See ”Creating an Access Table” on page 220.
There are four default values for this field that are reserved for
SNMPv1 and SNMPv2c implementations:
❑ defaultV1GroupReadOnly
❑ defaultV1GroupReadWrite
❑ defaultV2cGroupReadOnly
❑ defaultV2cGroupReadWrite
6. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the SecurityToGroup Table. After making changes to a
SecurityToGroup Table entry with a Volatile storage type, Save
Changes does not appear on the General tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the SecurityToGroup Table. After making changes to a
SecurityToGroup Table entry with a NonVolatile storage type,
Save Changes appears on the General tab. Allied Telesyn
recommends this storage type.