Allied Telesis AT-S63 - Manual (Page 114)

Chapter 9: Port Mirroring
114 Section I: Basic Features
Disabling a Port Mirror
To disable a port mirror, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Layer 1 option.
The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 18 on page 74.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 31 on page 110.
4. Click Modify.
The Modify Mirror page is shown in Figure 32 on page 111.
5. Click the Enable Mirror checkbox to remove the check and disable
the mirror.
6. Click Apply.
7. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.