Allied Telesis AT-S63 - Manual (Page 257)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 257
The Transport Tag parameter links an SNMPv3 Community Table
entry with an SNMPv3 Target Address Table entry. Add the value
you configure for the Transport Tag parameter to the Tag List
parameter in the Target Address Table as desired. See ”Creating a
Target Address Table Entry” on page 238.
8. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 Community Table. After making changes to
an SNMPv3 Community Table entry with a Volatile storage type,
Save Changes does not appear on the General tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the SNMPv3 Community Table. After making changes to an
SNMPv3 Community Table entry with a NonVolatile storage type,
Save Changes appears on the General tab, allowing you to save
your changes. Allied Telesyn recommends this storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the SNMPv3 Community Table
entry takes effect immediately.
9. Click Apply to update the SNMPv3 Community Table.
10. To save your changes, return to the General tab and click Save
Changes.