Allied Telesis AT-S63 - Manual (Page 138)

Chapter 11: Event Log
138 Section II: Advanced Features
Clearing the Event Log
You can clear the event log to remove old events and start fresh. To clear
the event log, do the following:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. Select the Event Log tab.
The Event log tab is shown in Figure 36 on page 128.
3. In the Log Settings section, click the Clear Log checkbox.
4. Click the button next to the location of the log you want to clear,
either Permanent or Temporary.
5. Click Apply to activate the settings on the switch.