Allied Telesis AR700 SERIES Software Release 2.7.1 - Manual (Page 48)

48 AR700 Series Router User Guide
Software Release 2.7.1
C613-02047-00 REV A
Remote Management
You can manage remote routers as easily as you manage the local router a
terminal is connected to. From a terminal connected to any port (with either
USER or MANAGER privilege), enter the command:
telnet ipadd
to Telnet to the remote router, specifying the remote router’s IP address.
For information about how to set routes and on how you assign an IP address
to your router, see
“Setting Routes” on page 16 and “Assigning an IP Address”
on page 15 .
If the connection is successful, a login prompt from the remote router is
displayed. Login using a login name that has been defined with MANAGER
privilege (such as the default MANAGER login name), and enter the
password.
To return to the local router and terminate the connection, enter the command:
logoff
For more information about using Telnet, see the Terminal Server chapter in the
Software Reference.
Storing Files in FLASH Memory
When you purchase the router, the router software release, the online help files,
and a default configuration file are stored in FLASH memory, where they are
saved even if the router is powered down. You will use the FLASH memory to
store updated software releases or patches, and files that record the router’s
configuration. FLASH memory is like a flat file system, with no subdirectories.
The router also has Random Access Memory (RAM). The router software uses
RAM to run the router. When you enter commands to configure the router
these commands affect the dynamic configuration in RAM.
SET STAR
SET USER
SHOW CONFIG
SHOW ENCO KEY
SHOW FEATURE
SHOW FILE
SHOW NVS
SHOW PPP CONFIG
SHOW STAR [=id], MKTTRANSFER, NETKEY
UPLOAD
Table 5: Commands requiring SECURITY OFFICER privilege when the router is operating in
security mode (Continued).
Command Specific Parameters