Allied Telesis AR700 SERIES Software Release 2.7.1 - Manual (Page 31)

31
Software Release 2.7.1
C613-02047-00 REV A
8. Load self-signed router certificate
To load the signed router certificate onto the router, use the command:
add pki certificate=cer_name location=cer_name.cer
trust=yes
9. Enable SSL on the HTTP server
To enable SSL on the HTTP server with previously created SSL Key and the
port 443, use the command:
set http server security=on sslkey=0 port=443
10. Configure an IP interface to run SSL over
To configure an IP interface that SSL will be run over, first enable IP using
the command:
enable ip
To make ETH0 the IP interface, and 172.30.1.105 the interface’s IP address,
use the command:
add ip interface=eth0 ip=172.30.1.105
To add an IP route on this interface with a next hop of 172.30.1.254, use the
command:
add ip route=0.0.0.0 interface=eth0 next=172.30.1.254
For this example to succeed, you would have to log in as “cipher” rather than
“manager” when connecting to the router with a web browser.
System Hardware Details
The GUI opens to display system hardware details. Figure 5 points out key
information contained on the page.
Figure 5: The System Hardware Details page
Model name
Help, Save and Exit
Sidebar menu
System status
Hardware information
Software release