Samsung SGH-T769NKBTMB User Manual
Page 216
212
Wi-Fi Direct Settings
You can configure your device to connect directly with other Wi-Fi
capable devices. This is an easy way to transfer data between
devices. These devices must be enabled for
Wi-Fi direct communication. This connection is direct and not via
a hotspot or WAP.
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
1.
Press
➔
and then tap
(Settings)
➔
Wireless and network
➔
Wi-Fi Direct settings.
2.
Tap Wi-Fi Direct. A check mark displayed next to the
feature indicating it is enabled. Your phone will begin to
search for other devices enabled with Wi-Fi direct
connections.
3.
After scan, tap a device name to begin the connection
process to another Wi-Fi Direct compatible device.
Note: The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
4.
Tap Connect. The direct connection is then established.
5.
When prompted to complete the connection, tap OK. The
status field now reads “Connected” and your connected
device is listed within the Wi-Fi Direct devices listing.
Wi-Fi Calling
You can configure your device to make and receive calls over an
active Wi-Fi connection. Wi-Fi Calling is an excellent solution for
coverage issues in and around the home or wherever cellular
coverage is limited. Minutes used while connected to the Wi-Fi
network count against available rate plan minutes. For more
information, refer to “Wi-Fi Calling” on page 66.
1.
Ensure that the Wi-Fi connected icon displays on the
status bar.
2.
Press
➔
and then tap
(Settings)
➔
Wireless and network
➔
Wi-Fi Calling.