Samsung SM-N900TZWETMB - Manual (Page 285)

Changing Your Settings 279
Call Barring
Configures the device to barr (prevent) selected outbound
calls.
1. From the main Call settings page, tap Additional
settings.
2. Tap Call barring and select from the available settings.
Choose from: All outgoing calls, International calls, Intl’
calls except home, All incoming calls, or Incoming
when roaming.
Call Waiting
1. From the main Call settings page, tap Additional
settings.
2. Tap Call waiting to enable/disable the on-screen
notification of new incoming call during an active call.
Auto Redial
1. From the main Call settings page, tap Additional
settings.
2. Tap Auto redial to automatically enable/disable the
feature whereby the device redials the dialed number if
it is unable to connect or the call is cut off.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls
to a limited set of phone numbers.
Enabling FDN
1. From the main Call settings page, tap Additional
settings ➔ Fixed dialing numbers.
2. Tap Turn on FDN.
3. At the prompt, enter your PIN2 code and tap OK.
Important! Not all SIM cards use a PIN2 code. If your SIM card
does not, this menu does not display.
The PIN2 code is provided by your carrier. Entering
an incorrect PIN2 code could cause the phone to
lock. Contact customer service for assistance.
Changing the PIN2 Code
1. From the main Call settings page, tap Additional
settings ➔ Fixed dialing numbers.
2. Tap Change PIN2.
3. At the prompt, enter your old PIN2 code.
4. At the prompt, enter a new PIN2 code.
5. Confirm your PIN2 code.