DAVIS GroWeatherLink Software - Manual (Page 51)

U S I N G T H E S O F T W A R E
Setup Menu
44
3. When finished entering alarm information, choose Set.
The software sets the stations alarms to match the settings in this dialog box.
Leaf Wetness
The radio buttons on this dialog box indicate whether the software and station are
currently configured for leaf wetness or soil temperature. If, for example, you
select Leaf Wetness from the Setup menu and find that the button next to Leaf
Wetness is already highlighted (as shown below), then you know that your con-
sole is configured to expect leaf wetness readings.
To reconfigure both the software and the console, simply select the appropriate
sensor, or leave as is, and click OK.
Note: Before changing from the soil temperature sensor to the leaf wetness sensor (or vice versa),
download data and clear your archive memory.
By default, the software and console will assume the Soil Temperature sensor,
rather than the Leaf Wetness sensor, is installed.
Note: If, at any point, your data indicate numbers appropriate to soil temperature when you intend
to be logging leaf wetness, or vice versa, then your software and console are probably out of
sync. If this happens, simply select the appropriate sensor in the above dialog box and click
OK to configure both the software and the console at once.