DAVIS GroWeatherLink Software - Manual (Page 44)

U S I N G T H E S O F T W A R E
Setup Menu
37
Set Archive Interval
You may choose to store data to the WeatherLink data logger every 1, 5, 10, 15, 30,
60, or 120 minutes. This interval is known as the archive interval. For information
on archive memory and the effect that the archive interval has on the amount of
data which may be stored in the WeatherLink, see “Archive Memory” on page 95.
Note: Be aware that setting the archive interval clears your archive memory. You should download
data before changing archive interval (see “Download” on page 48).
1. Choose Set Archive Interval from the Setup menu.
The Set Archive Interval dialog box appears. The radio button selected when
the dialog opens (in this case, “10 min,”) indicates the WeatherLink’s current
achive interval setting.
S ET A RCHIVE I NTERVAL
2. Select the desired archive interval and choose OK.
The software warns you that it is about to clear the archive memory.
C LEAR A RCHIVE W ARNING
3. Choose OK.
The software sets the archive interval and clears the archive memory.