DAVIS GroWeatherLink Software - Manual (Page 31)

S O F T W A R E I N S T A L L A T I O N
Finding the Correct Serial Port
24
5. Choose OK.
If the software located the loopback connector, it returns you to the Serial Port
Settings dialog box. Otherwise, the software prompts you to indicate whether
you want to check all other standard serial ports.
C HECK S TANDARD S ERIAL P ORTS C ONFIRMATION
6. Choose OK.
The software will search all standard serial ports for the loopback connector.
When finished, the software will either inform you that it could not locate the
loopback connector or it will inform you of the COM port at which it located
the connector.
L OOPBACK C ONNECTOR F OUND C ONFIRMATION
7. Choose OK.
The software returns you to the Serial Port Settings dialog box. You will notice
that the software selects the correct COM port.
8. Choose OK.
The software saves these settings.