DAVIS GroWeatherLink Software - Manual (Page 47)

U S I N G T H E S O F T W A R E
Setup Menu
40
1. Choose Set Hum Cal from the Setup menu.
The Set Humidity Cal dialog box appears. The raw reading shown in this dia-
log box indicates the unadjusted reading coming from the sensor. The
adjusted reading indicates what the software displays, adjusted for any previ-
ously entered calibration number.
S ET H UMIDITY C AL
2. Enter the desired adjusted reading and choose OK.
The software automatically calculates the necessary calibration number to
convert the raw reading into the adjusted reading and saves that calibration
number to the station and the station’s configuration file.
Set Total Rain
You may want to enter a total rainfall amount to reflect any rainfall which
occurred before you obtained your station or before you started using the soft-
ware. In order for the software’s rainfall totals to remain consistent with the sta-
tion’s totals, you must enter total rainfall from the software.
1. Choose Set Total Rain from the Setup menu.
The Set Total rain dialog box appears.
S ET T OTAL R AIN
2. Enter the total rainfall amount and choose OK.
The software saves the total rainfall amount.