DAVIS GroWeatherLink Software - Manual (Page 37)

U S I N G T H E S O F T W A R E
Setup Menu
30
S E T U P M E N U
The commands in the Setup menu relate to station and soft-
ware setup. Each of the commands is explained separately
below.
Walkthrough
The station setup walkthrough automatically steps you
through the entire station configuration procedure. It is
explained in some detail in“About the Walkthrough” starting
on page 11.
Station Config
You may enter a number of station-specific settings and information which help
to identify each particular station.
1. Choose Station Config from the Setup menu.
The Station Configuration dialog box appears.
S TATION C ONFIGURATION
2. Enter the following information:
▲ Name
To change the station’s name, type a new name into this text box. The soft-
ware automatically changes the name of all station files and directories.
▲ Rain Collector
Select the increment in which the rain collector you use with the station
measures rainfall. If you do not have a rain collector, choose None.