DAVIS GroWeatherLink Software - Manual (Page 24)

S O F T W A R E I N S T A L L A T I O N
Adding a Station
17
14. Choose OK.
The software opens the Set Barometer dialog box. In this dialog box, you may
set the barometric pressure on your weather station to the correct barometric
pressure. For more detailed instructions on this dialog box, see “Set Barome-
ter” on page 38.
S ET B AROMETER D IALOG B OX
15. After setting the barometric pressure, choose OK.
The software sets the barometer on the weather station and prompts you to
indicate whether you want to set the rainfall calibration number (Rain Cal) on
the weather station (to make sure the calibration number is correct for the type
of rain collector you indicated in the station setup).
16. Choose OK.
The software opens the Set Rain Cal confirmation box. For more detailed
instructions on this box, see “Set Rain Cal” on page 38.
S ET R AIN C AL C ONFIRMATION B OX
17. Choose Yes.
The software sets the rainfall calibration number and prompts you to indicate
whether you want to enter a total rainfall amount for the weather station (for
example, to reenter the amount of total rainfall you had registered before you
removed power from the weather station to install the Weatherlink).