Ag Leader EZ-Guide 500 Variable Rate Getting Started Guide - Manual (Page 30)

Verify that Status displays Connected. 3.
Note: If Status displays Not Connected, verify that the EZ−Guide 500 to Raven controller cable is
securely connected to the EZ−Guide 500 lightbar and the Raven controller. If the cable is secure, verify
that the EZ−Guide 500 lightbar and Raven controller are configured correctly, as detailed above.
On−Screen Features with a Raven Controller
When the Raven variable rate controller is connected to the lightbar, the following features appear or become
available:
ITEM DESCRIPTION
1 The actual current rate
2 Switching indicator (grey) shows that the controller is in manual switching mode.
3
Boom section status indicators change color to show the current state of each boom section:
* Green − The boom section is enabled and spraying.
* Orange − The boom section is enabled but not currently spraying.
* Red − The section is off (the switch is off).
4
Application indicator. The wheel spins when the Raven master switch is on and the lightbar receives
flow messages reported from the variable rate controller.
28