Ag Leader EZ-Guide 500 Variable Rate Getting Started Guide - Manual (Page 13)

ITEM DESCRIPTION
1
The actual current rate
Note: If the rate switch position is M (Manual) and the vehicle is not moving, NA is displayed.
2
Auto/manual switching indicator shows which switching mode the controller is in.
* When the controller is in manual switching mode, the indicator is gray.
* When the controller is in automatic switching mode, the indicator is in color.
3
Fence nozzle indicator
If a fence nozzle is enabled, an indicator appears. Fence nozzle status is represented with the same
colors as the boom sections.
4
Boom section status indicators change color to show the current state of each boom section:
* Green − The boom section is enabled and spraying.
* Orange − The boom section is enabled but not currently spraying.
* Red − The section is off (the switch is off).
5
Rate switch position (Rate 1, Rate 2, or Manual)
Note: To use application rates from a prescription file, the rate switch must be set to Rate 1.
6
The intended target rate
Note: If the rate switch position is M (Manual), the current flow rate (F:) is displayed. If the vehicle is
not moving, NA is displayed.
7 EZ−Boom quick access icon
8 Information tab listing sprayer−specific information
EZ−Boom quick access icon
The icon enables you to access the most common EZ−Boom settings more quickly. When you select the
icon, the following screen appears:
Alternatively, to configure the EZ−Boom 2010 system for use with the lightbar, set the User Mode to Advanced
and then select Configuration / Application Control.
For more information, refer to the EZ−Boom 2010 System for the EZ−Guide 500 Lightbar Quick Reference Card.
11