Ag Leader Base Station Hardware Manual - Manual (Page 50)

48 AutoSteer System
Mount the Base Station Enclosure
4. Attach the connector of the Radio Modem Antenna Cable to the Radio Modem Antenna.
5. Route the Radio Modem Antenna Cable from the Radio Modem Antenna to the Base Station Receiver. Secure the cable all
along the route to keep it from being damaged.
Mount the Base Station Enclosure
1. Install the Base Station enclosure firmly against a wall or other sturdy structure that is easily accessible and near a power
source. The antenna cable and power connectors must be pointed downward to prevent moisture build up. Use the
appropriate screws to secure the enclosure to the specific wall material being used.
2. Connect a good copper ground strap to the ground stud.
Note: The ground strap must be connected to an effective earth ground to unload a lightning surge.