Ag Leader Base Station Hardware Manual - Manual (Page 40)

38 AutoSteer System
AFLink Software Configuration
6. Store and transport the A5 Steer Base Station equipment in its case.
AFLink Software Configuration
The Base Station AFLink radio modem must have its frequency set to the one that matches the owner’s license. The AutoSteer
system dealer should be able to set this frequency using the AFLink Programming Utility.
To connect the computer to the AFLink radio, the following Technician cables are required:
•
Fixed Base Radio Tech Cable (201-0280-01)
•
External Radio Tech Cable (201-0221-01)
•
Optional Power Supply Cable with Battery Clips (201-0171-01)
•
Optional Power Supply Cable with Bare Wires (201-0151-01)
Note: The vehicle radio modem must also be set to the same frequency. See the AFLink Radio Installation Guide for Rovers
for instructions on how to change the frequency of the vehicle radio or use the AFLink Programming Utility.