HP PCIe IO Accelerators for ProLiant Servers - Manual (Page 82)

HP IO Accelerator Management Tool 82
7. Click Next to proceed
8. Click Update. The selected drives display a blue progress bar in the Device Report panel as the
update occurs. This bar shows both the percentage and the estimated time remaining to complete the
update.
When the update completes, the IO Accelerator Management Tool displays a dialog box requesting
you to reboot to complete the process.
9. Click OK.
10. Power down and restart the computer to ensure a full reset of the system and installation of the
firmware.
Firmware already updated
The IO Accelerator Management Tool program verifies that the firmware update version is required for
the selected device. If the update and the current firmware are the same, IO Accelerator Management
Tool notifies you.
The dialog box shows the same firmware version number in both the dialog box and the message that the
selected device is already up-to-date. The IO Accelerator Management Tool program also grays
out the Update button since this change is not required.