HP Photosmart D7560 Printer - Manual (Page 21)

2. Touch Tools.
3. Touch the down arrow to scroll through the options, and then touch Restore Factory
Defaults.
The factory default settings are restored.
Play a slideshow on the display
You can set up the HP Photosmart to play a slideshow on the display, similar to a
screensaver on a computer, when you are not using the product.
There are two types of slideshows that you can enable:
• Demo Mode: appears after the HP Photosmart is inactive for one minute. The
HP Photosmart shows interactive slides that enable you to try various features of the
product. If Demo Mode is on, the product will not go to a low power sleep mode.
Demo Mode is off by default.
NOTE: HP recommends leaving Demo Mode off.
• Tips Slideshow: appears only after you print from the computer. The HP Photosmart
shows a short set of slides with information describing special features available on
the product. The slideshow plays twice and then the display returns to the Home
screen. Tips Slideshow is on by default.
To turn the demo mode on or off
1. Touch the Setup icon.
2. Touch Tools.
3. Touch the down arrow to scroll through the options, and then touch Demo Mode.
4. Touch On or Off.
To turn tips slideshow on or off
1. Touch the Setup icon.
2. Touch Tools.
3. Touch the down arrow to scroll through the options, and then touch Tips
Slideshow.
4. Touch On or Off.
Adjust the volume
The HP Photosmart provides three levels for adjusting the volume of sounds associated
with device events and errors. The default setting is Soft.
Chapter 4
18 Finish setting up the HP Photosmart
Finish set
up