HP Photosmart D7560 Printer - Manual (Page 164)

Card is damaged
Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format. For more information, see
the documentation that came with your digital camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.
Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
Card is not fully inserted
Solution: Make sure you fully insert the memory card into the appropriate slot on
the product.
If the memory card is not inserted properly, the product will not respond and the
attention light will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for
a few seconds, and then remain lit.
Cause: The card was not fully inserted.
CD/DVD is upside down
Solution: Make sure the CD/DVD is snapped onto the CD/DVD holder with the
printable label side up.
Cause: The CD/DVD was loaded upside down on the CD/DVD holder.
CD/DVD printing problem
Solution: Make sure that there is sufficient space behind the product and that the
CD/DVD exit slot on the back of the product is not blocked. If the product is placed
close to a wall, move it at least 7.5 cm (3 inches) away from the wall.
Cause: The product stalled while printing.
Errors 161
Trou
bles
ho
ot
ing