HP Insight Control Software for Linux - Manual (Page 44)

10. Add one or more filters for the Act on systems field. The filters information is detailed as:
Table 3-3 Act on systems
Description Filters
Selects systems that belong to a specified Systems Insight Manager
collection. Collections can be defined and edited using the
Customize link on the left side of the Systems Insight Manager
window.
collection
Selects systems in the specified data center. This is set on the
system page for each rack, and is inherited by all systems in the
rack.
data center
Selects systems in the specified row of the data center. This is set
on the system page for each rack, and is inherited by all systems
in the rack.
data center row
Selects systems in the specified blade enclosure. This is
automatically discovered.
enclosure
Selects systems that have the specified overall health status, as
computed by Systems Insight Manager from a variety of sources.
hardware status
Selects systems that have the specified IP address. This is
automatically discovered.
ip address
Selects systems running the specified operating system. This is
automatically discovered.
operating system
Selects systems in the specified position in their row of the data
center. This is set on the system page for each rack, and is
inherited by all systems in the rack.
position in row
Selects systems that are directly or indirectly powered by the
specified circuit. This is set on the system page for each rack, or
may be automatically discovered.
power source
Selects systems that have the specified product (model) name. This
is automatically discovered.
product name
Selects systems in the specified rack. This is set on the system page
for each rack, or may be automatically discovered.
rack
Selects systems with the specified server role. This is set using the
Options > System Properties menu item in Systems Insight
Manager.
server role
Selects systems with the specified name. This is automatically
discovered.
system name
Selects systems with the specified sub-type. This is automatically
discovered.
system sub-type
Selects systems with the specified type. This is automatically
discovered.
system type
Selects virtual machines hosted by the specified virtual machine
host. This is automatically discovered.
virtual machine host
You can click Add to add more filters. To delete a filter, click Delete that is available near a filter.
11. Click Save Step to save the step for the rule. Or, click Cancel to discard the changes. The new step
appears in the Steps table of the New Rule section of the Power Control Rules page.
NOTE: To edit a step, select the step in the Steps table, click Edit Step and follow the steps 6-9 as
mentioned above.
NOTE: To delete a step, select the step in the Steps table, click Delete Step. In the dialog box that
appears, click Yes.
12. To add more steps, click New Step again and follow the above procedure.
13. Click Save Rule to save the rule. Or, click Cancel to cancel the new rule.
The new group name will be listed in the Rule List table immediately, after the group that was selected,
when you click New Group.
44 Basic procedures